Ask a Question

Straight Oils, also referred to as neat oils, are petroleum or vegetable based oils that do not contain water. They are used as is or “straight” without being diluted. Straight oils are used in metalworking applications where lubricity is more critical than heat reduction.

Mike-O-Thread Dark

A dark colored premium quality, heavy viscosity cutting oil that provides smooth, clean and accurate thread cutting on all metals. Sulfurized and chlorinated extreme pressure additives provide excellent lubrication in severe cutting applications such as pipe threading, sawing, and other difficult slow-speed operations.

Part Numbers: E-3003-14, E-3004-05, E-3005-55.

Mike-O-Thread Light

A light colored premium quality, heavy viscosity cutting oil that provides smooth, clean and accurate thread cutting on all metals. Sulfurized and chlorinated extreme pressure additives provide excellent lubrication in severe cutting applications such as pipe threading, sawing, and other difficult slow-speed operations.

Part Numbers: E-2003-14, E-2004-05, E-2005-55.

Mike-O-Drill DH-60

A heavy duty, light viscosity cutting oil with sulfurized and chlorinated extreme pressure additives. It is a high performance product for use in deep hole drilling, heavy cutting, sawing, and other difficult operations on both ferrous and nonferrous materials.

Part Numbers: E-2253-14, E-2254-05, E-2255-55.

Wax Stick

An innovative, multi-purpose lubricant which effectively removes heat and lubricates while withstanding tremendous pressures. It is often used as a replacement for tapping and cutting fluids. Ideal for sawing, drilling,tapping, pipe threading, and as a cement form release agent.

Part Numbers: E-6001-01

Mike-O-Drill TP-60

A heavy duty, light viscosity cutting oil. Sulfurized and extreme pressure additives provide hydrodynamic and polar lubrication. This product is recommended for screw machines, chuckers, band saws, and bar machines.

Part Numbers: E-2385-14, E-2385-05, E-2385-55, E-2385-275.

Mike-O-Drill TP-100

A light viscosity cutting oil for use in very difficult applications. Sulfurized and chlorinated extreme pressure additives provide hydrodynamic and polar lubrication.

Part Numbers: E-2390-05, E-2390-55, E-2390-275

Mike-O-Thread SM-60

A premium quality, transparent, light colored, heavy duty, chlorine free cutting oil. Formulated with highly refined base stocks and inactive sulfur, this product offers excellent anti-weld properties and forms effective boundary lubrication which reduces heat and extends tool life. Excellent for use in screw machines and threading applications. Use for milling, turning, drilling, grinding and other operations.

Part Numbers: E-3610-14, E-3610-05, E-3610-55, E-3610-275.

Mike-O-Thread SM-100

A premium quality, heavy duty, cutting oil. Formulated with highly refined base stocks and extreme pressure additives, this product offers excellent anti-weld properties, and forms effective boundary lubrication which reduces heat and extends tool life.

Part Numbers: E-3613-05, E-3613-55, E-3613-275.

Mike-O-Thread SM-150

A premium quality, heavy duty, cutting oil. Formulated with highly refined base stocks and extreme pressure additives, this product offers excellent anti-weld properties, and forms effective boundary lubrication which reduces heat and extends tool life.

Part Numbers: E-3615-05, E-3615-55, E-3615-275.

Mike-O-Thread SM-180

A premium quality, transparent, light colored, heavy duty, chlorine free cutting oil. Formulated with highly refined base stocks and inactive sulfur, this product offers excellent anti-weld properties and forms effective boundary lubrication which reduces heat and extends tool life. The additive system also provides

Part Numbers: E-3630-05, E-3630-55, E-3630-275.

Grinding Oil CFO

A premium quality, transparent, light colored, heavy duty, chlorine free grinding fluid. Formulated with highly refined base stocks and active sulfur, this product offers excellent anti-weld properties, and forms effective boundary lubrication which reduces heat and extends wheel life. The additive system also provides anti-misting properties along with good surface finish on the workpiece.

Part Numbers: E-2504-05, E-2504-55, E-2504-275.

Cutting Oil SLV

A synthetic, light viscosity cutting and grinding oil. Its unique fatty acid composition provides natural and extended product stability. Excellent for use in grinding, machining and sawing. It is a biodegradable product that does not contain petroleum oil, chlorine or sulphur.

Part Numbers: E-1100-14, E-1100-05, E-1100-55, E-1100-275.

Ashburn VXT 100

A high performance cutting oil formulated with vegetable esters for use in metal cutting and metal forming operations. It is fortified with extreme pressure additives for difficult machining of both ferrous and nonferrous materials. 

Part Numbers: E-1200-05, E-1200-55, E-1200-275.

Mike-O-Hone

A superior honing fluid for industrial and automotive honing operations. It is recommended for moderate to heavy duty applications.

Part Numbers: E-6223-14, E-6224-05, E-6225-55, E-6225-275

Hone Cut

A superior honing fluid for industrial and automotive honing operations. It is recommended for moderate to heavy duty applications. This product is formulated with highly refined base stocks and inactive sulfur to provide excellent lubricity, reduce heat and improve surface finish.

Part Numbers: E-6238-14, E-6238-05, E-6238-55, E-6238-275.

EDM Oil Grade A

premium quality, extremely light viscosity EDM oil that is designed to penetrate the spark gap area and flush away all fines. Its very high flash point and good dielectric strength make ASHBURN EDM A safe to use. The product has very low odor and protects the machine from rust and corrosion.

Part Number: E-2802-05, E-2803-55.

`

Ask A Question