Semi-Synthetic Coolants

Semi-synthetic coolants are metalworking fluid concentrates that contain a small amount of oil (usually less than 30%) as well as synthetic lubricants and other additives. When mixed with water, they form a translucent fluid. Semi-synthetics combine the physical lubricity of soluble oils with the chemical lubricity, cooling and cleanliness of synthetic coolants.

APEX 7900

APEX 7900 is a semi-synthetic coolant for machining and grinding ferrous and non-ferrous metals. It has almost no odor, is low foaming, and provides excellent bio-resistance for long life in both individual sumps and large central systems.

APEX 7900 forms a translucent emulsion that protects machines and parts from corrosion without depositing tacky or slippery residues. This coolant runs very clean with minimal drag out and quickly rejects tramp oils. With excellent lubricity, long sump life and low maintenance, this fluid can help reduce the number of products being used in a facility.

Technical Data Sheet

MSDS

APEX 7700EP

APEX 7700 EP is a heavy duty semi-synthetic water soluble metalworking fluid designed for use on ferrous and most nonferrous metals including cast iron and aluminum. It is fortified with extreme pressure additives for difficult machining and grinding operations. It has excellent emulsion stability in hard water and combines the cooling and cleanliness of synthetics with the rust protection and lubricity of soluble oils. It is suitable for turning, milling, drilling, sawing and grinding in individual sumps or central systems.

APEX 7700 EP contains well balanced additive technology proven to extend fluid life and inhibit microbial growth. It forms a translucent emulsion that protects machines and parts from corrosion without depositing tacky or slippery residues. This robust multipurpose metalworking fluid provides an economical solution to high fluid usage and waste by eliminating frequent system recharges, high make-up rates and excessive use of costly tank side additives.

APEX 7700 EP works well in hard and soft water. It will not form hard water soaps or cause excessive foaming in soft water. The product has a mild pH and leaves machines clean and free of gummy tramp oil deposits which enhances operator acceptance. It provides trouble free performance on a wide range of metals and diverse operations in individual sumps and is equally suitable for continuous production requiring unimpeded efficiency, low maintenance and maximum fluid life.

Technical Data Sheet

MSDS

APEX 7700

APEX 7700 is a heavy-duty water-soluble cutting and grinding fluid fortified with extreme pressure additives for difficult applications. It is manufactured for turning, milling, drilling, sawing, and grinding in individual machine sumps or central systems. It will increase blade, tool, or wheel life and production.

APEX 7700 is Bio-Stable due to the fact that the raw materials naturally resist bacteria and fungus. It provides long term worry free sump life without disposal. It is very suitable for today’s advanced recycling equipment. This product can be used on ferrous and nonferrous metals including cast iron and aluminum.

APEX 7700 works well in hard water and will not form hard water soaps. This product has a mild pH and rejects tramp oil very well. This will greatly reduce the risk of operator’s skin or respiratory problems. The superior tramp oil rejection also reduces smoke during heavy cutting and increases the coolant’s sump life. The excellent rust and corrosion properties will protect the machine tools and provide short term rust protection on the machined parts.

Technical Data Sheet

MSDS

APEX 7000

APEX 7000 is a moderate to heavy duty semi-synthetic water soluble cutting and grinding fluid. It is manufactured for turning, milling, drilling, sawing, and grinding in individual machine sumps or central systems. It will increase blade, tool, or wheel life and production. The raw materials are designed to resist bacteria and fungus. It provides long term worry free sump life. This product can be used on ferrous and nonferrous metals.

Technical Data Sheet

MSDS

APEX 7000NP

APEX 7000NP is a moderate to heavy duty semi-synthetic water soluble cutting and grinding fluid. It is manufactured for turning, milling, drilling, sawing, and grinding in individual machine sumps or central systems. It will increase blade, tool, or wheel life and production. The raw materials are designed to resist bacteria and fungus. It provides long term worry free sump life. This product can be used on ferrous and nonferrous metals.

Technical Data Sheet

MSDS

APEX 7030D

APEX 7030D is a moderate duty semi-synthetic water soluble cutting and grinding fluid. It is manufactured for turning, milling, drilling, sawing, and grinding. It will increase blade, tool, or wheel life and production. The raw materials are designed to resist bacteria and fungus. It provides long term worry free sump life. This product can be used on ferrous and nonferrous metals.

Technical Data Sheet

MSDS

APEX 7090

APEX 7090 is a moderate to heavy duty semi-synthetic water soluble cutting and grinding fluid. It is manufactured for turning, milling, drilling, sawing, and grinding in individual machine sumps or central systems. It will increase blade, tool, or wheel life and production. The raw materials are designed to resist bacteria and fungus. It provides long term worry free sump life. This product can be used on ferrous and nonferrous metals.

Technical Data Sheet

MSDS