Micro-Lubricant Cutting Fluids

Ashburn’s Mike-O-Lube cutting fluids are designed for use with micro-lubricant applicators. These non-misting applicators dispense individual droplets of fluid directly to the cutting tool. Mike-O-Lube cutting fluids are a clean and economical alternative to misting and flooding in applications such as drilling, tapping and sawing.

Mike-O-Lube 100

Mike-O-Lube 100 is a heavy-duty fluid fortified with extreme pressure additives for difficult machining and stamping of ferrous and nonferrous materials. This product provides excellent lubricity and boundary film lubrication. Mike-O-Lube 100 significantly increases tool and die life and greatly reduces wear.

Mike-O-Lube 100 does not contain nitrates, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. Its performance, pleasant metalworking environment, and operator acceptance are beneficial over flood coolant systems.

Technical Data Sheet

MSDS

Mike-O-Lube 110

Mike-O-Lube 110 is a heavy-duty fluid fortified with non-chlorinated extreme pressure additives. Use for difficult machining and stamping of ferrous and nonferrous materials including aluminum and titanium. This product provides excellent lubricity and boundary film lubrication. Mike-O-Lube 110 significantly increases tool and die life and greatly reduces wear.

Mike-O-Lube 110 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. Its performance, pleasant metalworking environment, and operator acceptance are beneficial over flood coolant systems.

Technical Data Sheet

MSDS

Mike-O-Lube 200

A medium to heavy-duty fluid for machining and stamping ferrous and nonferrous materials. Produced with a natural base oil, it does not contain solvents or petroleum oils.

Technical Data Sheet

MSDS

Mike-O-Lube 300

Mike-O-Lube 300 is a medium-duty fluid for machining ferrous and nonferrous materials. The product is very effective in general metal cutting operations, and also for use in woodworking applications. Mike-O-Lube 300 significantly increases tool life and greatly reduces wear.

Mike-O-Lube 300 does not contain nitrates, chlorine, sulfur, phenols, n Excellent Lubricity molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. Its performance, pleasant metalworking environment, and operator acceptance are beneficial over flood coolant systems.

Technical Data Sheet

MSDS

Mike-O-Lube 400

A synthetic water-based fluid for general purpose machining of ferrous and nonferrous materials. The product provides excellent cooling properties with good lubricity.

Technical Data Sheet

MSDS

Mike-O-Lube 500

Mike-O-Lube 500 is a heavy-duty fluid fortified with extreme pressure additives for use on difficult machining of nonferrous materials including n Works Well on Aluminum aluminum and titanium. This product provides excellent lubrication.

Mike-O-Lube 500 significantly increases tool and die life and greatly reduces wear. Use for high speed cutting, tapping, drilling, reaming, and sawing on nonferrous metals. It will not stain during post heat treating of nonferrous metals. However, always test scrap parts before using.

Mike-O-Lube 500 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. Its performance, pleasant metalworking environment, and operator acceptance are beneficial over flood coolant systems.

Technical Data Sheet

MSDS

Mike-O-Lube 600

Mike-O-Lube 600 is a medium-duty fluid for machining nonferrous materials. This product provides excellent lubrication. Mike-O-Lube 600 increases tool life and reduces wear. Use for medium-duty milling, drilling, tapping, sawing and punching of nonferrous metals. It will not stain during post heat treating of nonferrous metals. However, always test scrap parts before using.

Mike-O-Lube 600 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. Its performance, pleasant metalworking environment, and operator acceptance are beneficial over flood coolant systems.

Technical Data Sheet

MSDS

Mike-O-Lube 610

Mike-O-Lube 610 is a heavy-duty fluid fortified with extreme pressure additives for use on difficult machining of nonferrous materials including aluminum and titanium. This product provides excellent lubrication. Mike-O-Lube 610 significantly increases tool and die life and greatly reduces n Works Well On Aluminum wear. Use for high speed cutting, tapping, drilling, reaming, sawing, drawing and stamping on nonferrous metals. It will not stain during post heat treating of nonferrous metals. However, always test scrap parts before using.

Mike-O-Lube 610 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. Its performance, pleasant metalworking environment, and operator acceptance are beneficial over flood coolant systems.

Technical Data Sheet

MSDS

Mike-O-Lube 680

Mike-O-Lube 680 is a sawing and cutting lubricant for use on aluminum. This product provides excellent lubrication. Mike-O-Lube 680 will increase sawblade and tool life and reduce wear. It will not stain during post heat treating of nonferrous metals. However, always test scrap parts before using.

Mike-O-Lube 680 does not contain nitrates, chlorine, sulfur, phenols, molybdenum compounds or graphite. It contains no solvent and is considered a low VOC lubricant. Its performance, pleasant metalworking environment, and operator acceptance are beneficial over flood coolant systems.

Technical Data Sheet

MSDS