Coolant Additives

Coolant additives are not usually needed when Ashburn coolants are properly maintained and operating in a good environment. However, there are situations where a coolant is allowed to sit stagnant or operate in a poor environment for extended periods of time. In these situations it may be necessary to use additives to bring the coolant back to the correct specifications

Coolant Rejuvenator

A sump-side additive designed to control bacteria in order to prevent rancidity and prolong the life of your coolant. Concentrated. Normally added at 12 oz per 50 gallons of coolant.

Technical Data Sheet

MSDS

Coolant Conditioner

A sump-side additive designed to control fungus in order to prevent its growth and prolong the life of your coolant. Concentrated. Normally added at 3 oz per 50 gallons of coolant.

Technical Data Sheet

MSDS

Defoamer

Use for situations where foam occurs due to a combination of soft water, high pressure pumps and/or short settling time. Concentrated. Normally added at 1 oz per 50 gallons of coolant.

Technical Data Sheet

MSDS